Alu Doubler F and Alu Doubler P are industry exclusive automatic Milling and Bending system to ensure accuracy with a double fold on the edges of aluminum honeycomb/corrugated panels for architectural facades.

Alu Doubler P ( (bending) bends the main skin of aluminum honeycomb panels previously processed on Alu Doubler F or on a CNC router. Where the bending is performed the maximum thickness must be 0,5 mm.

It can execute single bending (90°) or double bending (180°). The 180° bending needs the corners to be prepared before the operation by a CNC panel router or by the optional pneumatic plate.

Once the panels have been processed by the ALU Doubler F, the panel will require additional processing to ensure the edges are properly closed by the ALU Doubler P afterwards. This is accomplished by an optional hand held pneumatic punch. (This can also be achieved on the ALU Ranger CNC)

Pluses of the machine

Double bending
ALU Doubler P performs the double bending of the finished layer, creating a clean finished edge and also protecting the aluminum core from potential corrosion and atmospheric agents.

Protected edge and corners
The full process made by Alu Doubler F and Alu Doubler P with the manual punch press allows to obtain alu honeycomb panels with protected edges and corners.

Hood suction system
Centralized hood suction system in a unique tube (Opt. LOAB31) allows to eliminate the wood chips through the suction system

Industrial panel feeding
Non-slip pad guarantees a firm grip of the panel.
Double row of rubber rollers are assembled on a very sturdy beam to manually adjust the pressure placed on the panel.

Option for large panels
To guarantee accuracy when processing larger panels, it will be necessary to employ additional supports when feeding the panels into the Alu Bender P.

The supports are equipped with adjustable feet and sliding rollers to create a safe work environment for the operator when processing large panels.