With the UPG1000 vacuum cup/glass cup you can lift and move loads of up to 1000 kg effortlessly. Thanks to the modular design, the suction plates can be optimally adjusted to the respective situation without tools. Thanks to the extension arms, larger elements can also be suctioned even better and more comfortably. The built-in support arm can be removed if necessary. Special attention was paid to the development of the suction pads. These have an enormously high adhesion and are characterised by long durability. During the suction process, it is important that the element to be lifted has a smooth, flat and air-impermeable surface. The suction process takes place directly on the unit. Optionally, the operator can control the suction process via a radio remote control. The suction cup monitors the vacuum pressure independently and pumps up again by itself if necessary. The user is also warned acoustically if there is an imminent loss of vacuum. Power is supplied independently of the mains via the integrated battery. As a rule, the vacuum cup has an operating time of approx. 8 hours. The suction unit can be rotated 360 degrees and tilted 90 degrees if necessary and can be used on almost any construction site.