Automatic rebar screwdriver - Stand and 2x Conveyor
Automatic rebar screwdriver - Stand and 2x Conveyor - GEVO - SE 01SA+O
Standard screwing unit, with automatic screw feeding, for screwing steel reinforcements into PVC profiles.
Stand (96.003) W=500mm, T=500mm
2x conveyors 150x1500 Height 690 mm – 1200 mm
- automatic screw dosing
- automatic shutdown of the magazine movement
- automatic depth disconnection
- pneumatic drive and control
- pneumatic screw ejection system and emergency stop
- foot-operated switch
- Profile clamping by adjusting the angle and stop.
- protective frame
Options:
- 13 Blow impulses to prevent the screw from jamming in the hopper's dead center
- D Pressure reducer for adjusting the screwing force
- H Additional manual screw feeder for the screwdriver
- L Extended working stroke 130 mm for high profiles
- P Targeting laser > line laser for positioning the screw
- T Adjustable screwing depth to prevent contact between the jaw and the profile (adjustable switch-off depth)
- Z Horizontal clamping - air piston for fixing the workpieces
320 x 520 x 1180 mm Width, length, height
46 kg Weight
1 kg Tank capacity
7 bar Air pressure
ca. 800 l / min Air consumption
450 W Power
2850 /min Speed
ca.5.8 Nm Max. torque
< 2 sec. Cycles per screw
25 mm – 100 mm Profile height
For self-tapping PHILIPS screws
Ø 6.0 – Ø 8.5 mm head diameter
Ø 3.0 – Ø 4.2 mm screw diameter
13 – 40 mm screw length
